IndustrialPlasticValves.com is your
source for valves, check valve, water valve, solenoid
valve, water valves, check valves, shut off valve,
solenoid valves, ball valve, pvc valves, and float
valve.
Select the category and type of valves from the list on
the left or check out the most popular below and to your
right. |
|
Popular Valves:
|
 Type
343 Horizontal 3-Way PVC Ball Valve
Manual full port horizontal, 3-way ball valve. Available
in PVC with solvent cement socket or threaded end
connections. Handle can be used as a tool for seat
adjustment. Screwed-in seat carrier has left-hand
threads to prevent unscrewing when threaded valve is
removed from the line. Seat back seal for automatic wear
adjustment and consistent torque. Can be actuated after
installation. |
|
 Type
353 +GF+ PVC Coloro Compact Ball Valve
Manual, 2-way PVC full port ball valves with
either solvent cement socket or threaded end
connections. Size range 1/2"-2". 232 psi socket and 150
psi threaded pressure ratings. PVC with solvent cement
socket or threaded ends EPDM seals. PTFE ball seats with
elastomeric backing O-ring for low torque and wear
compensation-no adjustment necessary. Available in PVC
with solvent cement or threaded end connections.
Monobloc structure provides high safety level: user
cannot disassemble or mis-adjust. |
|
 Polypropylene
Check Valve Series 694
Maximum Operating Pressure — 125 psi. Maximum
Operating Temperature — 140°F. Seat Area Open Diameter —
.438. The 694 Series Check Valve covers a wide range of
air and fluid applications. The 694 Check is a compact
design with a light cracking pressure, high flow rate,
and a positive seal at very low back pressure or slight
vacuum. |
|
 +GF+
True Union Ball Valve Series 546
Manual, 2-way, full port ball valve provides long
working life and maintenance-free performance. True
union permits radial installation or removal. Access to
all components (ball, stem, seats and seals) is provided
by removal of the left hand threaded seat carrier. The
ergonomic handle has a molded-in wrench to engage the
seat carrier. FPM Viton® seals and PTFE ball seats
standard 232 psi rating for PVC and CPVC. STM 1970-01
compliant end connections. Union nuts with strong
buttress threads. Seat carrier with fine pitched thread
for precise adjustment. Can be actuated after
installation. Max Temp: PVC 140°F. CPVC 80°F. PP 200°F. |
|
